HC-10 Sheath fault location system

1.Testing burning and pinpointing, direct resistance measurement, voltage and current limiter

2.Multiple signal reception methods used for different cable laying scenes(not just direct burial)

3.Mains and battery operated

4.Only one HV connection cable

5.Automatic evaluation and recommend test methods Step voltage method for cable sheath fault pin-pointing

6.Easy and comfortable operation via touch screen and rotary encoder

The HC-10 is used for cable and cable sheath testing, and for the pin-pointing of cable sheath faults and cable faults due to earth contact. The operation of the system is achieved via touch screen and rotary encod- er.Multiple signal reception methods used for different cable laying scenes：

·Cable trench or tunnel

·Cable pipe

·Direct burial

The very powerful 10 kV DC source allows HV cables to be tested..A multi-section facility permits the entry of cable segments with different parameters. Difficult cable faults can be “burned” thanks to the available high current.

Only one HV connection cable and through the touch screen or rotary encoder, you can follow the system instructions to complete the test.The system will automatically evaluate the insulation resistance of the sheath and recommend test methods.

1.Built in lithium battery, with a battery life greater than 6 hours

2.Portable suitcase design for easy outdoor movement

As far as we know, there are many ways to lay cables: in suburbs, they are mainly laid directly buried; in cities, there are also pipelines, cable trench or tunnel.Sheath failures in different laying scenarios require different positioning methods.