1.Surging (thumping) 8/16/32 kV,delivers 2,432 J
2.Easily installed in SUV models or as a mobile device Automatic determination of cable end and fault location
3.Built-in and functionally integrated Radar/TDR as well as ARM, ICE and DECAY prelocation methods
4.Wireless control and display of test results through tablet computer
5.Maximum safety during application
6.Equipped with intelligent mode and expert mode,suitable for different groups of people to use
TBS-1000 features three voltage selections (8/16/32kV) to accommodate different voltage levels of cable networks. With a maximum discharge energy of up to 2432J.
The system design is lightweight and integrated, making it easy to install into SUV models without the need for significant modifications or purchasing large vehicles.It can also be used as a mobile independent device,providing users with flexibility in various scenarios and enhancing portability and applicability.
Furthermore,the wireless tablet-based testing and data display capabilities allow users to conveniently monitor and record the testing process and results. In terms of software design, we have paid special atten- tion to user experience by incorporating both Expert and Intelligent modes, catering to different user groups. The system can automatically recommend testing methods and guide the entire cable fault location testing process, greatly simplifying operation procedures and improving work efficiency.
This modern operating philosophy with tablet computer,motorised switching,automated centralised controls and easy to use graphic user interface enables all users to focus on the actual process of finding the fault instead of having to remember, and to struggle with, all the details and subtlties of operating an old manual unit. The training burden on personnel is noticeably reduced. We know from customer feedback that it is not uncommon to internalize the controls within a few minutes and work the unit fluidly quickly, even without prior experience.
Featuring intelligent and expert modes, tailored to different user groups.In intelligent mode, the software will automatically analyze the waveform and recommend the next step.For buttons that require operation,they will be highlighted.Follow the instructions to complete the test.
The TBS-1000 is highly integrated and has a volume of only 900 * 650 * 703 mm(L * W * H) , making it easy to place in the trunk of an SUV models without the need for significant modifications or purchasing large vehi- cles.If you need, put it on wheels, it is also a mobile device.
HIGH VOLTAGE PART TECHNICAL DATA | |
HV DC source | 0-32 kV DC test (DC hipot) |
60 mA nominal continuous current at 32 kV | |
Breakdown detection | 0-32 kV |
Burning | 800W |
Standard surge levels | 32 kV/4.75 μF,16 kV/19 μF,8 kV/76 μF,2432 Jmax |
Surge rate | Adjustable 3-10 sec, and single shot |
Built-in prelocation | TDR,ARM ,ICE,DECAY |
Operating temperature | -20 ~ +45℃ |
Storage temperature | -40 ~ +60℃ |
Weight | 140kg |
Mains input supply | 220V AC,50/60 Hz,2kW |
Dimensions (L x W x H) | 900*650*703 mm |
Protection class | IP43 |
RADAR AND CONTROL UNIT TECHNICAL DATA | |
TDR setup | Physically and functionally integrated |
Contorl | Wireless tablet computer and Emergency Stop Box |
Display | 11.5'' |
Pulse generation | Bipolar |
Pulse amplitude | 50v |
Pulse width | 50ns ~10μs |
Measuring range | 0 m-100 km, at VOP = 80 m/µs |
ProRange | 0 -40dB |
Resolution | 0.1m(at 172m/μs) |
Data rate | 200MHz |
Velocity of propagation | 100-300m/μs |
Multishot support | Yes, 5 HV fault traces, |
Waveform storage capacity | Unlimited |